The ROKEE G1 recessed LED gas station canopy light provides bright, uniform illumination for fuel stations and covered commercial spaces. Offered in 60W, 80W, 100W, 120W and 150W versions, it delivers up to 140 lm/W while supporting three mounting methods for flexible new-build and retrofit installations.
Key Features of the G1 Recessed LED Gas Station Canopy Light
Recessed, surface-mounted and pendant configurations allow one product family to accommodate different canopy structures. Recessed installation produces a flush appearance, surface mounting suits solid ceilings without a suitable cutout, and pendant mounting can lower the fixture where additional working clearance is available. This flexibility helps standardize fixture selection across multi-site programs.
Optical Performance and Controls
An 80° distribution provides broad, even coverage across typical fueling bays and pedestrian circulation areas. The anti-UV polycarbonate lens transmits more than 95% of the light while resisting long-term solar exposure. ON/OFF, 0–10V dimming and ZigBee options allow the lighting to be operated as a simple fixed system or integrated into energy-management controls.
Durability and Service Life
The IP65 enclosure resists dust and water jets, while the IK10 lens assembly provides high impact resistance for busy commercial locations. AC100–277V input supports common international supplies. Color temperatures of 3000K, 4000K, 5000K and 5700K are available, with CRI above 80 for clear visibility of vehicles, surfaces and signage. Rated life exceeds 50,000 hours and warranty coverage is five years.
Applications
Recommended for petrol stations, service areas, EV charging canopies, toll stations, covered parking entrances, workshops and commercial canopy upgrades.
Technical Specifications
| Model | GS-01-G1 |
|---|---|
| Power | 60W / 80W / 100W / 120W / 150W |
| System Efficacy | Up to 140 lm/W |
| Input Voltage | AC100–277V, 50/60Hz |
| Beam Angle | 80° |
| CCT | 3000K / 4000K / 5000K / 5700K |
| CRI | Over 80 |
| Controls | ON/OFF / 0–10V / ZigBee |
| Protection | IP65 / IK10 |
| Mounting | Recessed / surface / pendant |
| Warranty | 5 years |
Canopy Lighting Design Considerations
Canopy lighting should be selected from mounting height, bay dimensions, fixture spacing and required illuminance rather than wattage alone. Uniformity is important because strong bright spots and dark zones can reduce visual comfort for drivers and staff. The chosen beam should place useful light on fueling positions, circulation paths and payment areas while limiting glare toward surrounding roads and nearby properties.
For retrofit projects, confirm the ceiling opening, available mounting depth, structural support and cable entry before ordering. Emergency, dimming and wireless-control functions should be defined in the project specification. Final emergency output and duration must comply with local regulations and be verified on the approved submittal.
Installation and Project Support
Installation should be completed by qualified personnel using properly rated cables, connectors and mounting hardware. Confirm supply voltage, grounding, control wiring and ingress protection before energizing the luminaire. Keep seals clean, tighten fasteners to the specified torque and test dimming or emergency functions during commissioning.
ROKEE can support photometric simulation, fixture spacing, product selection and project quotations. Send canopy drawings, mounting heights, target lux levels, electrical information and site photographs so the recommended configuration can be checked before installation.
Explore our LED gas station canopy lights, review industrial lighting projects, or contact ROKEE for a canopy lighting layout and quotation.
