The ROKEE G6 SUS316 marine LED flood light is engineered for ports, shipyards, coastal facilities and other corrosive outdoor environments. Available in 50W, 80W, 100W, 150W and 200W models, it combines marine-grade construction with controlled optics for dependable area lighting near salt water.
Key Features of the G6 SUS316 Marine LED Flood Light
SUS316 stainless steel is used for the housing, bracket, screws and retaining buckles, helping the fixture resist salt spray, moisture and corrosion. The IP66 enclosure protects internal components from dust and powerful water jets, while the IK09 tempered-glass front withstands mechanical impact. A 180° adjustable bracket supports precise aiming on walls, poles, decks and structural frames.
Optical Performance and Controls
System efficacy reaches up to 140 lm/W. Symmetrical 10°, 30°, 60° and 90° beams support narrow-to-wide projection, while 150×80°, 154×83° and 97×47° asymmetric distributions help illuminate elongated working areas with less wasted light. CCT options of 3000K, 4000K, 5000K and 5700K and CRI 70, 80 or 90 allow the specification to be matched to visibility and color-rendering requirements.
Durability and Long-Term Reliability
Efficient heat transfer supports stable output and an L70 service life above 50,000 hours across operating temperatures from -40°C to +50°C. The wide AC100–277V input simplifies international projects, and the five-year warranty supports long-term commercial use. This model is intended for corrosive marine environments but is not a substitute for certified explosion-proof lighting in classified hazardous locations.
Applications
Recommended applications include ports, docks, shipyards, marine terminals, piers, loading areas, coastal buildings, vessel service areas and non-hazardous offshore working zones.
Technical Specifications
| Model | FL-06-G6 |
|---|---|
| Power | 50W / 80W / 100W / 150W / 200W |
| System Efficacy | Up to 140 lm/W |
| Input Voltage | AC100–277V, 50/60Hz |
| Beam Angles | 10° / 30° / 60° / 90° / 150×80° / 154×83° / 97×47° |
| CCT | 3000K / 4000K / 5000K / 5700K |
| CRI | 70 / 80 / 90 |
| Protection | IP66 / IK09 |
| Operating Temperature | -40°C to +50°C |
| Warranty | 5 years |
How to Select the Right Configuration
Start with the size and shape of the target area, required illuminance, pole or wall height and allowable spill light. A narrow beam projects farther but requires accurate aiming; a wider beam covers more area at shorter distances. Wattage should be chosen from calculated lumen requirements rather than by replacing old fixtures watt for watt. For projects using cameras, controls or color effects, confirm flicker performance, color quality and protocol compatibility before ordering.
Environmental conditions are equally important. Coastal corrosion, frequent rain, airborne dust, vibration, high ambient temperature and lightning exposure can change the appropriate housing, surge protection and mounting specification. Confirm the exact options on the quotation and approved submittal because available combinations can vary by wattage and market.
Installation and Project Support
Final wattage, beam angle, mounting height and aiming should be selected from a project-specific photometric plan. Consider target illuminance, uniformity, surrounding properties, glare limits, local electrical requirements and maintenance access. Use qualified installers, suitable mounting hardware and correctly rated cables and connectors. Verify the supply voltage and control interface before commissioning, tighten all fasteners to the specified torque and aim each fixture according to the approved layout.
ROKEE can support fixture selection, photometric simulation, lighting layouts, control planning and project quotations. Providing drawings, mounting heights, target light levels, electrical information and site photographs helps our team recommend a practical configuration and reduces changes during installation.
Explore our LED flood light range, read the LED flood light selection guide, review industrial lighting projects, or contact ROKEE for photometric planning, product selection and a project quotation.
