The ROKEE G1 compact LED wall pack light provides practical exterior illumination for doorways, paths and small commercial areas. Available in 20W and 30W models, its low-profile housing is suited to locations where a larger commercial wall pack would be unnecessary.
Key Features of the G1 Compact LED Wall Pack Light
The compact structure and universal wall-mount design simplify installation on new and existing buildings. A wide 120° optical distribution spreads light across nearby walls and ground surfaces, supporting comfortable visibility at entrances and circulation areas. The anti-UV polycarbonate lens provides more than 95% transmission and strong impact protection.
Optics and Controls
ON/OFF, 0–10V dimming and photocell options allow the fixture to operate at fixed output, connect to a control system or switch automatically from dusk to dawn. AC100–277V input fits common commercial electrical systems, and available CCT options from 3000K to 5700K suit warm or neutral exterior environments.
Outdoor Durability
IP65 sealing protects the luminaire from dust and rain, while IK10 impact resistance supports exposed mounting. Optional 10kV or 20kV surge protection can be specified for sites with increased electrical risk. Effective heat dissipation supports more than 50,000 hours of service, and the fixture is backed by a five-year warranty.
Applications
Doorways, corridors, stairways, porches, pathways, small warehouses, service entrances, utility areas and building perimeters.
Technical Specifications
| Model | WP-01-G1 |
|---|---|
| Power | 20W / 30W |
| Efficacy | Up to 110 lm/W |
| Input | AC100–277V |
| Beam Angle | 120° |
| Controls | ON/OFF / 0–10V / photocell |
| CCT | 3000K / 4000K / 5000K / 5700K |
| Protection | IP65 / IK10 |
| Lens | Anti-UV PC; over 95% transmission |
| Warranty | 5 years |
Wall Pack Selection Guidance
Select wattage from mounting height, target illuminance and the area that must be covered. The optical distribution should place light on the ground and vertical task surfaces without creating excessive glare at eye level. Near residential boundaries, roads or neighboring properties, use shielded or full-cutoff optics and verify spill light with a photometric plan.
Photocells are useful for dusk-to-dawn operation, while 0–10V dimming supports scheduled reduction or occupancy-based controls. Confirm sensor orientation, control wiring and compatibility before ordering. Surge protection should be selected for local electrical conditions and the exposure of the building.
Installation and Project Support
Use qualified installers, seal wall penetrations and verify that the mounting surface can support the fixture. Outdoor-rated conduit, connectors and junction boxes are required. Aim adjustable models after dark, then tighten all fasteners. ROKEE can provide product selection, photometric calculations, layout recommendations and quotations when mounting information and target light levels are supplied.
Explore our LED wall pack lights, review industrial lighting projects, or contact ROKEE for a lighting layout and project quotation.
