The ROKEE G4 anti-light-pollution LED wall pack directs illumination toward the ground while limiting upward light and unnecessary spill. Available in 30W, 50W, 80W and 100W models, it delivers up to 140 lm/W for efficient commercial, industrial and perimeter lighting.
Key Features of the G4 Anti-Light-Pollution LED Wall Pack
A 130×60° asymmetric full-cutoff distribution projects light forward and downward from the wall. This helps improve visibility around entrances, loading areas and pedestrian routes while reducing glare, light trespass and wasted illumination above the fixture. The IK10 anti-UV polycarbonate lens provides more than 95% light transmission and protects the optical system from impact.
Optics and Controls
ON/OFF, 0–10V dimming and photocell options support fixed output, scheduled reduction or automatic dusk-to-dawn operation. AC100–277V input suits common commercial electrical systems. CCT options of 3000K, 4000K, 5000K and 5700K allow the appearance to be coordinated with site requirements and nearby properties.
Outdoor Durability
The IP65 enclosure is designed for outdoor walls exposed to dust and rain. Optional 10kV or 20kV surge protection improves resilience on electrically exposed sites. Effective thermal management supports a rated life above 50,000 hours across operating temperatures from -20°C to +50°C. The fixture carries a five-year warranty.
Applications
Warehouses, loading docks, schools, parking facilities, pathways, service entrances, commercial buildings and sites near residential boundaries.
Technical Specifications
| Model | WP-01-G4 |
|---|---|
| Power | 30W / 50W / 80W / 100W |
| Efficacy | Up to 140 lm/W |
| Input | AC100–277V |
| Distribution | 130×60° full cutoff |
| CCT | 3000K / 4000K / 5000K / 5700K |
| Controls | ON/OFF / 0–10V / photocell |
| Protection | IP65 / IK10 |
| Surge Protection | 10kV; 20kV optional |
| Warranty | 5 years |
Wall Pack Selection Guidance
Select wattage from mounting height, target illuminance and the area that must be covered. The optical distribution should place light on the ground and vertical task surfaces without creating excessive glare at eye level. Near residential boundaries, roads or neighboring properties, use shielded or full-cutoff optics and verify spill light with a photometric plan.
Photocells are useful for dusk-to-dawn operation, while 0–10V dimming supports scheduled reduction or occupancy-based controls. Confirm sensor orientation, control wiring and compatibility before ordering. Surge protection should be selected for local electrical conditions and the exposure of the building.
Installation and Project Support
Use qualified installers, seal wall penetrations and verify that the mounting surface can support the fixture. Outdoor-rated conduit, connectors and junction boxes are required. Aim adjustable models after dark, then tighten all fasteners. ROKEE can provide product selection, photometric calculations, layout recommendations and quotations when mounting information and target light levels are supplied.
Explore our LED wall pack lights, review industrial lighting projects, or contact ROKEE for a lighting layout and project quotation.
