The ROKEE G3 full-cutoff LED wall pack provides controlled downward illumination for building exteriors and industrial perimeters. Available in 30W, 50W, 70W, 80W and 100W models, it reaches up to 125 lm/W and includes an adjustable lamp head for precise aiming.
Key Features of the G3 Full-Cutoff LED Wall Pack
The lamp head adjusts through 90°, allowing installers to coordinate the beam with different wall heights and target areas. When correctly aimed, the shielded optical design helps limit upward light, glare and spill beyond the property boundary. An independent modular driver box improves access for wiring, servicing and component replacement.
Optics and Controls
A 120° distribution provides broad area coverage around walls and entrances. ON/OFF, 0–10V dimming and photocell options support fixed lighting, demand reduction or automatic dusk-to-dawn operation. The AC100–277V input and CCT options from 3000K to 5700K accommodate common commercial projects.
Outdoor Durability
The cast aluminum housing and tempered-glass cover protect the optical and electrical components. IP65 weather protection and IK09 impact resistance support exposed outdoor installations. Optional 10kV or 20kV surge protection can be selected for higher electrical risk. The rated life exceeds 50,000 hours and warranty coverage is five years.
Applications
Warehouses, loading docks, commercial buildings, parking areas, pedestrian routes, service entrances and industrial perimeters.
Technical Specifications
| Model | WP-01-G3 |
|---|---|
| Power | 30W / 50W / 70W / 80W / 100W |
| Efficacy | Up to 125 lm/W |
| Input | AC100–277V |
| Beam Angle | 120° |
| Adjustment | 90° lamp-head rotation |
| Controls | ON/OFF / 0–10V / photocell |
| Protection | IP65 / IK09 |
| Driver | Independent modular box |
| Warranty | 5 years |
Wall Pack Selection Guidance
Select wattage from mounting height, target illuminance and the area that must be covered. The optical distribution should place light on the ground and vertical task surfaces without creating excessive glare at eye level. Near residential boundaries, roads or neighboring properties, use shielded or full-cutoff optics and verify spill light with a photometric plan.
Photocells are useful for dusk-to-dawn operation, while 0–10V dimming supports scheduled reduction or occupancy-based controls. Confirm sensor orientation, control wiring and compatibility before ordering. Surge protection should be selected for local electrical conditions and the exposure of the building.
Installation and Project Support
Use qualified installers, seal wall penetrations and verify that the mounting surface can support the fixture. Outdoor-rated conduit, connectors and junction boxes are required. Aim adjustable models after dark, then tighten all fasteners. ROKEE can provide product selection, photometric calculations, layout recommendations and quotations when mounting information and target light levels are supplied.
Explore our LED wall pack lights, review industrial lighting projects, or contact ROKEE for a lighting layout and project quotation.
