The ROKEE LED padel court light is engineered for padel courts, tennis courts, club facilities, training centers, school sports areas and outdoor racket-sport venues. Available power configurations include 240W/320W/420W, allowing designers to match light output to pole height, venue dimensions, target lighting class and project budget.
With 160Lm/W CCT: 3000K/4000K/5000K/5700K system efficacy, 100*60°/90°/60°/30°/20° optics and IP66 Lifespan: >100,000H / IK10 protection, this luminaire supports efficient, controlled outdoor illumination. Final wattage, fixture quantity, optical distribution and aiming angles should be confirmed through project-specific photometric calculations.
Key Features
- 240W, 320W and 420W configurations
- Court-oriented 100° × 60° optic
- Direct mounting for 50–63 mm poles
- Front and rear anti-glare visors
- IP66 outdoor protection with project-specific impact rating
- 10 kV standard surge protection with optional 20 kV SPD
- Five-year warranty
Court-Specific Optics for Padel and Tennis
The dedicated 100° × 60° optical distribution is designed to spread useful light across a rectangular court while limiting excessive light behind the target area. Depending on the court dimensions, pole positions and target lighting class, a four-luminaire arrangement may provide an efficient starting point for padel lighting design.
A direct pole-mount bracket is available for 50–63 mm poles, reducing the need for additional adapters. Front and rear visors help control glare for players looking upward and reduce spill light toward neighboring properties.
Optical Control and Glare Management
The available 100*60°/90°/60°/30°/20° distributions allow the LED padel court light to serve different aiming distances and target shapes. Narrow optics can project light toward distant zones, while medium, wide or asymmetric distributions can cover areas closer to the pole and improve uniformity across rectangular playing surfaces.
Glare shields, visors and accurate aiming should be selected according to the venue layout, spectator positions and surrounding properties. Useful light must reach the playing area without creating unnecessary upward light or spill beyond the project boundary.
Controls, Energy Management and Broadcast Planning
Control and dimming requirements should be confirmed during project design. Compatible drivers can be selected for conventional switching, scheduled operation or centralized venue management where available.
Where television broadcasting or high-speed cameras are planned, confirm the complete LED and driver configuration for CRI, TLCI, flicker performance, camera frame rate and vertical illuminance. CRI 80 or CRI 90 options may improve color reproduction, but the exact requirement should be specified before production.
Outdoor Durability and Service Life
The weather-resistant housing, outdoor-grade coating and sealed electrical connections are designed for exposed sports venues. Standard 10 kV surge protection is available, with an optional 20 kV configuration for sites requiring additional protection. Operating temperature, corrosion exposure and local lightning conditions should be reviewed when finalizing the specification.
Routine maintenance should include inspection of mounting hardware, safety restraints, cable glands, surge protection and optical surfaces. Cleaning schedules depend on local dust, salt, pollution and weather conditions. Correct maintenance helps the LED padel court light maintain its designed light output and aiming accuracy.
Installation and Project Planning
High-mast lighting performance depends on the complete system. Pole strength, crossarm capacity, wind loading, cable routing, driver location and safe maintenance access must be coordinated with the luminaire layout. Installers should set each fixture to the tilt and orientation specified in the approved photometric plan.
After installation, the system should be commissioned with on-site illuminance measurements and visual checks. Small aiming corrections may be required to balance uniformity, reduce glare and account for construction tolerances, but changes should remain consistent with the design intent.
Specifications
| Power: 240W/320W/420W | Input Voltage: AC120~277V 50/60Hz |
| Beam Angle: 100*60°/90°/60°/30°/20° | Effi.: 160Lm/W |
| CCT: 3000K/4000K/5000K/5700K | PF.: >0.9 |
| Impact Resistance Rating: IK10 | CRI:70/80/90 |
| Operating Temp: -40℃~+50℃ | Storage Temp: -40℃~+80℃ |
| SPD: 10KV(Optional) / 20KV(Optional) | Water-proof: IP66 |
| Lifespan: >100,000H | Warranty: 5 Years Warranty |
Applications
The LED padel court light is suitable for padel courts, tennis courts, club facilities, training centers, school sports areas and outdoor racket-sport venues. It can be used in new construction or retrofit projects where existing poles and electrical infrastructure are retained, subject to structural and electrical verification.
Photometric Planning and Project Support
For an accurate proposal, provide the field dimensions, sport type, pole locations and heights, target illuminance and uniformity, lighting class, broadcasting requirements and local spill-light limits. ROKEE can recommend power, optics, quantity and aiming based on a project-specific lighting calculation.
ROKEE can also support retrofit reviews, driver selection, control planning and sample approval. Confirmed project data helps avoid over-lighting, dark zones, unnecessary connected load and unsuitable beam selections.
Explore more LED sports lights, review our sports lighting projects, or contact ROKEE for photometric planning and a project quotation.
